mejorset american buildingmejorset certificados eurocodesmejorset certificado iso 14001mejorset certificado iso 9001mejorset certificado iso ce en 1090

Full Panoramic

The super panoramic view padel court

The Full Panoramic court, a superpanoramic view, without corners (pillars),  recognized as the best padel court due to the clean view it provides and and the most avant-garde design. Optionally this court can integrate a ring of portability, it does not require screws to anchor it to the ground.Ideal for events or to install it in an area where it is not possible to drill holes. Example: on top of a tennis court.

  • No structural elements in glazing areas
  • Offers a spectacular indoor and outdoor view for both the player and the spectator
  • Adapted for all environments and locations while allowing a fantastic panoramic view for televised matches

Structure

The enclosure of the court is formed by self-supporting structure with structural tube, closed and anchored with two lower and upper perimeter rings, made of structural sheet metal in 5mm.

Galvanized steel painted or coating the structure with baked epoxy polyester resin. Electro welded galvanized mesh 50x50x4mm with delivery without projections.

Frames formed with 2mm thick structural tube according to specifications, 3 horizontal 40x5mm plate crossbars.
For anti-buckling, we work on a premium finish that offers a perfect vision without any structural element around the perimeter of glass with custom elements on door posts and structural elements.


Up to 2 colors on the structure to be chosen by the client.

  • Length: 20 m (internal dimensions of the game) 20.40 m (external dimensions of the court).
  • Width: 10 m (interior measurements of the game) 10.40 m (exterior measurements of the court)
mejorset cristales templados 12 mm y 10 mm

Glass

Certified 12mm tempered glass for the panoramic backgrounds and for the sides. In the case of the side windows, this court can mount 2 large 2x3m windows, the same size as the bottoms or the traditional system. All of them installed on 5mm neoprene to reduce vibrations and breaks. The manufacturing process of all this tempered glass is manufactured using a standardized production process and in compliance with the UNE EN 12150-1 standard.

Advantages of the tempered glass:

  • Ability to withstand tensile stress, with a higher resistance than that of annealed glass.
  • In case of breakage, the tempered glass disintegrates into small fragments that do not cause serious cutting or lacerating injuries, such as those that would be caused by the sharp edges of small pieces of annealed glass.
  • These characteristics make tempered glass a good choice for people's safety, especially since it does not break into sharp or large shards.
  • Tempered glass has four times the mechanical strength of annealed glass.

mejorset colores de pista
Colour Personalization

Paint

The metallic elements are covered with a thermosetting powder polyester paint formulated with polyester resins. This finish, in a color desired by the client, provides these elements with good resistance to corrosion and ultraviolet rays, as well as being highly resistant to mechanical impacts .

Once the powder paint is applied electrostatically on the surface of the material, the pieces go to an oven where they are heated to a temperature between 180ºC-200ºC, in which polymerization occurs.

In coastal / maritime areas where salt fog is formed which, driven by the wind, generates conditions of high risk of corrosion. (especially in the first 100m), we apply a set of extra actions that involve protecting the metal structure of the track against corrosion.

The structure can be painted with the RAL that the client decides, optionally the track can be painted in 2 shades, for example the stalk of the spotlights can be in a different color.

COATING
Double coating
In coastal and salty environments, we treat the structure with an additional two-coat primer system of pure epoxy, which is coated with either a powder or liquid finish. 
PRIMING
PRE-TREATMENT
FOUNDATION
QUALICOAT seal

Monofilament Turf

12mm monofilament artificial straight grass of the latest generation. This type of surface is ideal for outdoor use due to its composition and faster drainage. It is also recommended for outdoor use, especially in high temperatures, as it better withstands heat.

Available in the 4 official colors accepted by the International Padel Federation: blue, green, orange/clay, and black.
_monofilamento-cesped-colores

Textured Turf

10mm textured turf, artificial turf used in the center court of the main professional tournaments in the world. Perfect for indoor use and especially recommended for professional tournaments.

It stands out for the textured effect of its filaments, which provide greater rotational and longitudinal traction capacity. It allows an increase in the grip and therefore improves the safety and performance of the displacements.

All of our range of grass guarantees maximum performance, safety, comfort, and durability and are recommended by the association of professional padel players and the International Padel Federation.

_texturizado-cesped-colores

Illumination

Lineal LED lighting with 8 spotlights of 200w is specially designed for our padel courts.

According to NIDE standards, the lighting of a paddle court will be uniform and in a way that does not hinder the vision of the players, the referee team, or the spectators.

We comply with the UNE EN 12193 standard "Lighting for sports facilities".

The advantages of LED projectors for Padel courts:

  • Instant on, so you can make the most of the player's time on the court, as opposed to traditional halide spotlights that take time to to reach their maximum luminosity.
  • Low heat emission, highly recommended for indoor paddle courts due to their small size.
  • Compliance with the lighting regulations of the International Padel Federation.
  • Energy saving, our LED projectors save up to 65% of energy compared to traditional halide bulbs.

Contact form

Our sales process

We strive to make business easy, dynamic, and extremely understandable, just like in padel.

1
We customize your court or padel club with a custom design.

Configure the ideal court with our 3D configurator or contact us so we can send you the design that best suits your needs.

2
We define the project and send an estimate.

We will arrange a video call to clarify any details or resolve any possible doubts.

3
Start of construction

Once the agreement is signed and the commercial proposal is accepted, we start working to ship and install your courts.

4
Ready to Play

The average court construction and installation time are 33 days (30 days factory and 3 days installation). Transportation depends on location.

icono web mejorset
Mejorset
Usually responds within a few hours.
Irina
Hello.
How can I help you today?
mejorset whatsapp icon
OPEN CHAT
mejorset whatsapp
1
LOADING
GENERATING PDF