Panoramic RC10

Padel court 20x10 m. made of galvanized steel structure painted or coated with epoxy-polyester resin baked in the oven according to the characteristics of the technical specifications. Galvanized electro-welded mesh 50x50x4mm with delivery without interior projections. Frame joints with threaded rods, washers, and rounded stainless steel blind nuts. Double entrance door opening of 1.10 cm.

Including posts and netting fully finished in accordance with FIP material approvals.

Optional custom corner finish, beams in 140x60x2 galvanized structural tubing. Sides 80.60.2 in intermediate 3 m high, anchor plates 300x180x10 mm and 200x190x10 mm with 10 mm sheet metal gussets, with screws m14 or higher and metal plugs minimum length 140 mm.

Fastening to the floor by means of " or similar type dowels, metal structural reinforcement brackets up to 0.5 m in height at the base of pillars supporting glass, horizontal crosspieces at 1 m and 2 m of 30x30x2mm for anti-paneling, upper sealing of pillars with PVC plugs.

‍

Certified 12 mm tempered glass for the panoramic backdrops and sides. In the case of the side glass, this court can be fitted with 2 large 2x3m windows, the same size as the backdrops, or with the traditional system. All of them are installed on 5 mm neoprene to reduce vibrations and breakage. The manufacturing process of all this tempered glass is made through a standardized production process and in accordance with the UNE EN 12150-1 standard.

‍

Advantages of the tempered glass:

• Ability to withstand tensile stress, with a higher resistance than that of annealed glass.
• In case of breakage, the tempered glass disintegrates into small fragments that do not cause serious cutting or lacerating injuries, such as those that would be caused by the sharp edges of small pieces of annealed glass.
• These characteristics make tempered glass a good choice for people's safety, especially since it does not break into sharp or large shards.
• Tempered glass has four times the mechanical strength of annealed glass.

‍

Monofilament artificial grass of the latest generation, a new range of artificial turf for Padel courts that favors a higher speed of play, is safer, more stable, and more resistant.

‍

The 12mm monofilament grass is available in the 4 official colors accepted by the International Padel Federation: blue, green, orange/clay, and purple.

‍

We also have the new 10mm textured turf, artificial turf used in the center court of the main professional tournaments in the world, which stands out for the textured effect of its filaments, which provide greater rotational and longitudinal traction capacity. It allows an increase in the grip and therefore improves the safety and performance of the displacements.

‍

All of our range of grass guarantees maximum performance, safety, comfort, and durability and are recommended by the association of professional paddle players and the International Padel Federation.

‍

LED lighting with 8 spotlights of 150w or 200w is specially designed for our padel courts.

‍

According to NIDE standards, the lighting of a paddle court will be uniform and in a way that does not hinder the vision of the players, the referee team, or the spectators.

‍

We comply with the UNE EN 12193 standard "Lighting for sports facilities".

‍

The advantages of LED projectors for Padel courts:

• Instant on, so you can make the most of the player's time on the court, as opposed to traditional halide spotlights that take time to to reach their maximum luminosity.
• Low heat emission, highly recommended for indoor paddle courts due to their small size.
• Compliance with the lighting regulations of the International Padel Federation.
• Energy saving, our LED projectors save up to 65% of energy compared to traditional halide bulbs.

‍

The metallic elements are covered with a thermosetting powder polyester paint formulated with polyester resins. This finish, in a color desired by the client, provides these elements with good resistance to corrosion and ultraviolet rays, as well as being highly resistant to mechanical impacts .

Once the powder paint is applied electrostatically on the surface of the material, the pieces go to an oven where they are heated to a temperature between 180ºC-200ºC, in which polymerization occurs.

In coastal / maritime areas where salt fog is formed which, driven by the wind, generates conditions of high risk of corrosion. (especially in the first 100m), we apply a set of extra actions that involve protecting the metal structure of the track against corrosion.

The structure can be painted with the RAL that the client decides, optionally the track can be painted in 2 shades, for example the stalk of the spotlights can be in a different color.

‍

• Length: 20 m (inside game measurements) 20.40 m (outside court measurement)
• Width: 10 m (inside game measurements) 10.40 m (outside court measurement)

‍

Optionally, this court can integrate a portability ring, it does not require screws to anchor it to the ground. Ideal for events or to install it in an area where it is not possible to make holes. Example: on top of a tennis court.

Optionally you can buy:

• Net protectors with custom logo
• Protectors for the exits and net post, to avoid injury to the players.
• Personalized spotlight staves
• Protective nylon net on bottoms and / or sides to avoid the loss of balls.
• Custom competition game net.

‍

To know the price of the model Panoramic RC10 you must request a quote, contact us and we will prepare a personalized quote.